Traditional Hardware Direct

Where Quality Counts

Home

About us

Recent News

New Items

Catalogue

WINDOW FITTING PRODUCTS

Fasteners

Sash Lifts & Eyes

Simplex System

Sash Pulleys

Security Products

Casement Stays & Fastener

Fanlight Accessories

SASH CORD PRODUCTS

Sash Cord Range

10m Hank - Wax Cotton S.C

100m- Coil Wax Cotton S.C

10m Hank- Nylon S.C.

100m Coil- Nylon S.C.

10m Red Dot Cotton S.C.

100m Red Dot Cotton S.C.

10m Polyester 8plt S.C.

100m Polyester 8plt S.C.

WEATHERSEAL PRODUCT RANGE

Sash Weatherseal Range

S.A. Carrier 6.5mm Pile

Ctr Leg Crrier 6.5mm Pile

Offset Leg Crr 6.5mm Pile

Mtg Style Crr 6.5mm Pile

Flat Bottom Carrier no Pi

S.A. Pile Carrier No Pile

Centre Leg Crrier No Pile

Offset Leg Crrier No Pile

Slidex

Slide Piles

Partex, with 8.5mm Pile

Parflip 12mm Parting Bead

Parflip 16mm Parting Bead

Retaining Profile

Staff Seal

AQUATEX WEATHERSEALS

Aquatex Weatherseal Range

Aquatex A10 (21)

Aquatex A17 (89)

Aquatex A13 (700)

Aquatex P8 (48)

Aquatex P11 (109)

Aquatex P6 (63)

Aquatex S20 (124)

Aquatex S21 (91)

Aquatex S25 (97)

Aquatex D slot 5mm (69)

Aquatex D Slot 6.5mm (70)

Aquatex D Slot 7.5mm (71)

Aquatex D Slot 9.5mm (72)

STAFF AND PARTING RANGE

Staff Bead Range

Parting Bead Range

Exiwood Staff & Parting B

DOOR ACCESSORY PRODUCTS

Hinges

Numerals

Bolts

Cabin Hooks

Pulls

Coat Hooks

Handrail Brackets

Finger Plates

Door Stops

Door Chains

Door Viewers

FINISHES AND PRODUCT CARE

How To Order & Pay

Deliveries

Contact Us

Terms And Conditions

 

News from Traditional Hardware Direct


January 2015
Further items available in Antique Brass
After a number of requests over the last few months the THD148 Double Steel Washered Simplex Hinges are now available in the Antique Brass finish.
 
Over the next few months we will be introducing further items in Antique Brass currently not available at the moment.

THD148 DSW Simplex Hinges in Antique Brass


April 2014
We are on the Move
On the 28th April 2014 we moved to a larger premises, still based in Darwen, Lancashire, this will allow us to continue to grow, we have many new products in the pipeline and moving units will enable us to bring these to market.
 
Our new address is:-
Traditional Hardware Direct Ltd
Unit 2A, Hall Moss Trading Park,
Bolton Road, Bull Hill,
Darwen, Lancashire.
BB3 2TT
 
The Telephone & Fax numbers are the same.
 

THD New Unit


October 2013
 
Interlink Carrier 
 
From the 1st October 2013 we are to use Interlink for some of the deliveries to our customers. This is to provide a more reliable service, especially to third party addresses .....
 
Using Interlink provides the opportunity for the reciever to be sent a text or an email to inform them of a 1 hour delivery window.
If you wish to recieve a text/email from Interlink, when you place your order please provide us with the relevant information.



THD103 Straight Arm Fastener - Old Beehive Knob - Standard - Non-Locking
THD103 Straight Arm Fastener - Old Beehive Knob - Standard - Non-Locking
October 2013
 
NEW Range of Straight Arm Fasteners.
 
We have just added a whole new range of Straight Arm Fasteners. They come either in Standard size (20x65mm) or a Narrow size (15x65mm) and have the option of a Locking Keep to allow the fasteners to be locked. We have a range of different styled knob
 
THD101 & THD101N: Oval Knob
 
THD102 & THD102N: Acorn Knob
 
THD103 & THD103N: Old Beehive Knob
 
THD104 & THD104N: Ceramic Knob
 
THD105 & THD105N: Ball Knob
 
The Locking Keeps are THD109 & THD109N
 
All of which are provided in the following finises:
Chrome Plated
Polished Brass
Satin Chrome Plated
Antique Brass
 
They are being rolled out throughout October, so contact us for more information and their availability.

THD105N Straight Arm Fastener - Ball Knob - Narrow: Non-Locking
THD105N Straight Arm Fastener - Ball Knob - Narrow: Non-Locking
THD109 Locking Keep for Standard Sraight Arm Fastener
THD109 Locking Keep for Standard Sraight Arm Fastener


THD163E Pole End
THD163E Pole End
September 2013
 
NEW Pole Hook End.
 
THD163E is a decorative Solid Brass Pole Hook End which is fitted to the opposite end of the wooden pole. It can also be used to hand up the pole by the ring. 
 
The Pole End is supplied in either a Polished Brassed, Chrome Plated, Satin Chrome Plated or Antique Brassed Finish.
 



Red Dot Bleached Cotton Sash Cords
August 2013
 
NEW Sash Cords.
 
We have 2 new Sash Cords to provide an alternative to the Wax and Nylon Sash Cords.
 
A Red Spot Bleached Cotton Sash Cord supplied in 10m hanks or 100m coils.
The Traditional Red Spot cords provide excellent over Pulley and in resisting abrasion.
Available in the following sizes:
6mm diameter (Breaking Load 85kg) 
7mm diameter (Breaking Load 110kg)
8mm diameter (Breaking Load 125kg)
 
A Polyester 8 Plait Sash Cord supplied in 10m hanks or 100m coils.
The Polyester cords have a high tenacity a low stretch man made with fibre.
They are Rot and Mildew Proof with full UV degradation resistance.
Available in the following sizes:
6mm (Breaking Load 380kg) 
8mm (Breaking Load 770kg)
 
Both are manufactured in the UK and available in 10m hanks or 100m coils.
Click on image for more information.

Polyester 8 Plait Sash Cord


NEW Reeded Casement Fastener with Hook and Mortice Plate.
NEW Reeded Casement Fastener with Hook and Mortice Plate.
June 2013

 NEW Reeded Casement Fastener & Stay.
 
THD132 is the Reedend end version of the Casement Fastener. It is supplied with a choice of fixing plates, a rebated mortice plate and face fix hook plate.
 
The Reeded Casement Stay includes the 2 pins and is supplied in 3 different sizes.
THD129 200mm
THD130 250mm
THD131 300mm

 
Both the Stays and Fasteners are supplied in either a Polished Brassed, Chrome Plated, Satin Chrome Plated or Antique Brassed Finish.

NEW Reeded Casement Stay.
NEW Reeded Casement Stay.


THD133, THD134, THD135 Classic Victorian Spoon Casement Stay
THD133, THD134, THD135 Classic Victorian Spoon Casement Stay
June 2013
 
NEW Classic Heavy Version of the Spoon End Casement Stay.
 
This heavier Classic Victorian Stay, includes the 2 pins and is supplied in 3 different sizes.
THD133 200mm
THD134 250mm
THD135 300mm
 
They are supplied in either a Polished Brassed, Chrome Plated, Satin Chrome Plated or Antique Brassed Finish.



Click Here
June 2013
 
Standard version of the DIY Draught Proofing Kits
 
A standard version of our DIY Draught Proofing Kit provides an alternative and more economic version to our existing English and Scottish DIY Kits. It replaces your existing Staff and Parting Bead with new Primed Beams complete with Exitex Carrier and Pile already inserted in the wood, which prevents draughts, water and will reduce noise levels.
 
There are 2 versions supplied, 1.5 and 3 metres.
 
(Click on Image for more details)



Click Here to see our online copy.
 
 
 
 
 
 
NEW 2013 CATALOGUE
 
This year we have revamped our catalogue which includes our newest items and ranges. We have provided an online copy, but if you would like a hard copy don't hesitate to contact us.



April 2013
 
See our New Full Range of Staff and Parting Bead
 
After very good sales of our original two Staff and Parting Beads, we can now offer a full range, which includes the Scottish Staff (Baton Rod) and Parting Beads.
 
All our new sizes of Staff and Parting Beads compliment our range of Exitex Carriers and Slide Pile.
 
All our Beads are supplied in 3 metre lengths and are avaliable Primed or Un-Primed.
 
We now supply the following sizes:-
 
Staff Bead
20mm x 15mm, 25mm x 15mm, 20mm x 20mm, 24mm x 20mm, 28mm x 20mm and the Scottish Staff Bead 33mm x 16mm.
 
Staff Bead to suit the Aquatex A10 (THD1021) Flipper Seal:-
20mm x 15mm
 
Parting Bead
25mm x 7mm, 28mm x 7mm and the Scottish Parting Bead 22mm x 14mm
 
All the Beads are manufactured to the highest quality from sustainable managed forest.
 
(Click on the image for more details)
 

 


THD138 Ball Bearing - Standard Case, 2" Brass Wheel Pulley with a Radius Solid Brass Faceplate
THD138 Ball Bearing - Standard Case, 2" Brass Wheel Pulley with a Radius Solid Brass Faceplate
April 2013
 
THD138 New Ball Bearing 2" Solid Brass Wheel Pulley and a Solid Brass Radius Faceplate
 
THD138 Ball Bearing - Standard Case, Solid Brass Wheel Sash Pulley with Radius Solid Brass Faceplate
Supplied in a choice of 4 different finishes, Polished Brass, Chrome Plated, satin Chrome and Antique Brass.
 
 

 
(Click on the image for more details)
 
 
 
 
 
 
 
 
 

 
THD139 New Ball Bearing 2" Solid Brass Wheel Pulley and a Solid Brass Square Faceplate
 
THD139 Ball Bearing - Standard Case, Solid Brass Wheel Sash Pulley with Square Solid Brass Faceplate
Supplied in a choice of 4 different finishes, Polished Brass, Chrome Plated, Satin Chrome and Antique Brass.
 

 
(Click on the image for more details)

THD139 Ball Bearing - Standard Case, 2" Brass Wheel Pulley with a Square Solid Brass Faceplate
THD139 Ball Bearing - Standard Case, 2" Brass Wheel Pulley with a Square Solid Brass Faceplate


THD136 Sash Pivot
March 2013
 
THD136 Sash Pivot
 
Traditional solid brass concealed Sash Pivot allows the sash to be removed for maintenance and cleaning
Supplied as a pack (2 each pivot)
 
 
 (Click on the image for more details)
 
 
 
 
 
 
 
 
THD137 Sash Pivot
 
Traditional solid brass concealed Sash Pivot.
Supplied as a pack (2 each pivot)
 
 
 
 
(Click on the image for more details)

THD137 Vertical Sash Pivot


October 2012
NEW: Galvanised Pulley with Solid Brass Wheel and a range of Ball Bearing Pulleys

THD252 and THD253 1.75" Brass Wheel Pulley with Steel Galvanised Faceplate
THD252 and THD253 1.75" Brass Wheel Pulley with Steel Galvanised Faceplate
 
1.75" Brass Wheel Pulley with Steel Galvanised Faceplate
 
New to our extensive range of Sash Pulleys is the 1.75" Brass Wheel Pulley with either a Square or Radius ended Steel Galvanised Faceplate.
 
Available in 2 finishes, Zinc Plated and Electro-Brassed
 
THD252 = Radius Faceplate
THD253 = Square Faceplate
 
 (click on the image for more information)
 
Ball Bearing - Standard Case: 1.75" Brass Wheel Pulley with Solid Brass Faceplate
 
New to our extensive range of Sash Pulleys is the 1.75" Standard Ball Bearing Brass Wheel Pulley with either a Square or Radius ended Solid Brass Faceplate.
 
Available in 5 finishes, Polished Brass, Chrome Plated, Satin-Chrome Plate, Antique Brass and Stainless Steel.
 
THD270 = Radius Faceplate
THD271 = Square Faceplate
 
 (click on the image for more information)
 
 
Ball Bearing - Heavy Duty: 2.25" Brass Wheel Pulley with a Seperate Brass Faceplate
 
New to our extensive range of Sash Pulleys is the 2.25" Heavy Duty Ball Bearing  Pulley with a Brass Wheel and either a Square or Radius ended Brass Faceplate.
 
Available in 3 finishes, Polished Brass, Chrome Plated and Satin-Chrome Plated.
 
THD277R = Radius Faceplate
THD277 = Square Faceplate
 
 (click on the image for more information)

THD270 and THD271 Ball Bearing - Standard Case, 1.75" Brass Wheel Pulley with a Solid Brass Faceplate
THD270 and THD271 Ball Bearing - Standard Case, 1.75" Brass Wheel Pulley with a Solid Brass Faceplate
THD277R and THD277 HD 2.25" Brass Wheel, Ball Bearing Pulley with seperate Face Plate
THD277R and THD277 HD 2.25" Brass Wheel, Ball Bearing Pulley with seperate Face Plate


THD106 Art Nouveau Claw Fastener
THD106 Art Nouveau Claw Fastener
October 2012
 
Art Nouveau - Non Locking - Claw Fastener
 
New to our extensive range of Sash Fasteners is THD106 a classic Art Nouveau Claw Fastener
Available in 4 finishes, Polished Brass, Chrome Plated, Satin Chrome and Antique Brass
 
 
 
(click on the image)



AQUATEX WEATHERSEALS NOW SUPPLIED BY THE METRE 

Aquatex Weatherseal Range
July 2012
Following recent requsts from the trade, we are pleased to confirm that the Aquatax Weatherseal is now available by the Metre.
We are still supplying the Aquatex by the reel, as this is the is the most economical way, but have found on occasions that some customers only required some of the items in smaller lengths.
NOW AVAILABLE BY THE METRE
(click on the image)

Available by the Metre


THD1302 Flat Bottom PVC Carrier without Pile Fitted

THD1302 Flat Bottom Carrier without Pile
July 2012
 
THD1302 Flat Bottom Carrier Without Pile

We have had a number of enquiries recently for the Flat Bottom PVC Carrier but without the Self Adhesive attached, the stock arrives early July and will be supplied in 2.2 metre lengths.
Supplied in the following finishes:

THD1302/WH 
Flat Bottom Pile Carrier Without Pile. White
(click on the image)



THD267R 2" Wheel Heavy Duty Ball Bearing Pulley with Radius Faceplate

July 2012
 
Following on from our very popular THD267 Heavy Duty Ball Bearing Pulley - which is supplied with a Separate Solid Brass Square Faceplate, to complement this Pulley we have introduced a Radius version.
 
The code number for this new Radius version is THD267 with a letter R (for Radius) after the number = THD267R 
 
Manufactured to a heavy duty standard and are ideal for Heavy Double Glazed Units.

Supplied in Polished Brass, Chrome Plated and Satin Chrome Plated.
 
(click on the image)



UK Manufactured Waxed Cotton Sash Cord with Polyester Core now avaliable in 5mm in both 10M Hanks and 100M Reels

THD292 5mm Wax Cotton Sash Cord 10M Hanks
THD293 5mm Wax Cotton Sash Cord 100M Reel
June 2012
  
We have recently introduced a "NEW SIZE" 5mm Wax Cotton Sash Cord with a Polyester Core in both a 10M Hank and a 100M Reel.
Quality UK Manufactured Sash Cord.



THD257/AB Locking Pin for Casement Stays now avaliable in Antique Brass

THD257 Locking Pin for Casement Stays
THD257 Locking Pin for Casement Stays
May 2012
 
We have recently introduced a further finish for the Solid Brass Lockable Pin which suits our Antique Brass Victorian Casement Stays.
 
Other finishes available are:-
Polished Brass
Chrome Plated
Satin Chrome Plated
Black 
 
(click on the image)



Victorian Sash Bars Complete with "New" Shaped Ends

Victorian Sash Bar with Ball Ends
Victorian Sash Bar with Ball Ends
Victorian Sash Bar with Acorn Ends
Victorian Sash Bar with Acorn Ends
Victorian Sash Bar with Fancy Ends
Victorian Sash Bar with Fancy Ends
May 2012
 
Following increasing sales of our original Reeded Ended Victorian Sash Bars we have now introduced 3 alternative Ends, Ball, Acorn and Fancy to extend our range.
 
These new Sash Bars are available from stock in all the usual sizes and finishes and are assembled in our warehouse before despatch.
 
Sizes avaliable, 140mm, 210mm, 300mm, 450mm & 600mm (measured between the feet) add an approximate 80mm to calculate the full length of the Sash Bar
 
Finishes available, Polished Brass, Chrome Plated, Satin Chrome Plated and Antique Brass



April 2012

NEW products added:
 
Flat Sash Eye - Heavy Duty,
THD143 Heavy Duty version of the THD204 Flat Sash Eye, ideal for tall Sash Windows that require a Pole Hook to be used to operate the Top Sash.
Supplied in Polished Brass, Chrome Plated, Satin Chrome and Antique Brass.   
 
 
 (click on the image)
 
 
Decorative Sash Handle,
THD278 Highly decorative hand crafted version of a Traditional Sash Handle, reproduced from an original product fitted to windows in the early 1900s.
Supplied in Polished Brass, Chrome Plated. Satin Chrome and Antique Brass
 
(click on the image)

THD143 Sash Eye - Flat - Heavy Duty
THD143 Sash Eye - Flat - Heavy Duty
THD278 Sash Handle - Decorative
THD278 Sash Handle - Decorative


April 2012

NEW products added:
 
Pack of 4 Knock in Sash Stop, supplied in 2 lengths, 15mm and 19mm.
 
THD144 =15mm length barrel.
THD145 =19mm length barrel.
Easy to fit Knock in Sash Stop, supplied with 4 Sash Stops, 4 Striker Plates and 1Key.
Supplied in Polished Brass, Chrome Plated, Satin Chrome and Antique Brass.
 
 (click on the image)
 
Claw Fastener with Ceramic Knob - Locking
 
THD108L Locking version of our newly introduced non locking Claw Fastener with a Ceramic Knob. 
 
(click on the image)

THD144 / THD145 Knock in Sash Stop (pk4)
THD144 / THD145 Knock in Sash Stop (pk4)
THD108L Clo Fastener - Locking with Ceramic Knob
THD108L Clo Fastener - Locking with Ceramic Knob


April 2012

NEW Locking version of the Small Brighton Fastener.
 
THD185L Brighton Fastener - Small - Locking.
 
We have added a locking version of our popular THD185 Small Brighton Fastener, ideal for double glazed units leave very little room left to fit the Fastener, slim in design only 13mm in depth.
Supplied in Polished Brass, Chrome Plated, Satin Chrome and Antique Brass
 
 (click on the image)
 
 
THD107L Brighton "London Type" Fatener - Locking version of our THD107 heavier Acorn style Brighton Fatener
 
Supplied in Polished Brass, Chrome Plated, Satin Chrome and Antique Brass
 
(click on the image)
 

THD185L Small Brighton - Locking
THD185L Small Brighton - Locking
THD107L London Type Brighton Fastener - Locking
THD107L London Type Brighton Fastener - Locking


April 2012

NEW Staff Bead cut to fit the Aquatex A10 Foam Weatherseal
 
We have added a new ready cut staff bead.
Our latest additions are:
 
THD1210 Staff Bead 20mm x 15mm cut to fit the Aquatex (A10) THD1021 Weatherseal.
THD1211 Staff Bead 20mm x 15mm fitted with the Aquatex (A10) THD1021 Weatherseal
(which seals gaps 5mm to 7mm)
Supplied as a Primed 3m length

(click on the image)


THD1211


December 2011

NEW Claw Fastener with Ceramic Knob

In our committment to developing the range of Fasteners we have pleasure in introducing a new version of our popular Claw Fastener with a Ceramic Knob.

This product is available in the following finishes:
Polished Brass, Chrome Plated, Satin Chrome Plated and Antique Brass.

Code Number: THD108 Claw Fastener, Non-Locking with Ceramic Knob.

NB. A locking version of the Claw Fastener with Ceramic Knob will be available in the New Year

(click on the image)


THD108 Clo Fastener - Non Locking with Ceramic Knob
THD108 Clo Fastener - Non Locking with Ceramic Knob


December 2011

NEW Heritage Draught Proofing System

Introducing the Heritage Concealed Draught Proofing system for domestic and commercial properties.

The Heritage Draught Proofing System is now available in easy to use kits, on a supply only basis to both trade and DIY.

 

If you would like more information on this product, please do not hesitate to contact us.
Tel: 01254 773945

(click on the image)





December 2011

THD195/196 now available in Antique Brass

Due to customer demand we have now included the Antique Brass finish of our THD195/196 Sash Stop and are now available from stock.

(click on the image)

THD195 / THD196 in Antique Brass
THD195 / THD196 in Antique Brass


Summer 2011

NEW Staff and Parting Bead Range

We have introduced a range of Staff and Parting Bead to complement the Exitex range of Weatherseals.
 
We have started this range with the 20mm x 15mm Staff Bead and the 25mm x 7mm Parting Bead and plan to introduce further sizes at a later date.

If you would like a copy of the New Staff and Parting Bead Range Catalogue, please do not hesitate to contact us.
Tel: 01254 773945

(click on the image)



Summer 2011

NEW Aquatex Weatherseals Range

We have introduced a range of Aquatex Foam Weatherseals which complements our existing range of Exitex Weatherseals. 
 
If you would like a copy of the New Aquatex Weatherseals Range Catalogue, please do not hesitate to contact us.
Tel: 01254 773945

(click on the image)



Summer 2011

NEW Door Accessories Range

We have introduced a range of Door Accessories which includes, Hinges, Bolts, Numerals, Pulls and many other items.
 
If you would like a copy of the New Door Accessories Catalogue, please do not hesitate to contact us.
Tel: 01254 773945

(click on the image)

Door Accessories Range


Summer 2011

NEW Cord Plug, Aluminium

Alternative to the Brass Cord Plug, the new Aluminium version of the Traditional "Milk Bottle Top" Cord Plug is now available.

Code Number: THD146 Cord Plug, Aluminium

(click on the image)


THD146 Cord Plug, Aluminium
THD146 Cord Plug, Aluminium


Summer 2011

NEW Screw Out Sash Stop

A Traditional "Bartholomew" Screw out Sash Stop is now available. Fitted to the top Sash to restrict the bottom Sash from passing, the Sash Stop can be retracted with a screw driver to allow the window to open. Complete with Screws.

This new item is available in the following finishes: Polished Brass, Chrome Plated and Satin Chrome Plated.

Code Number: THD266 Screw Out Sash Stop

(click on the image)


THD266 Screw Out Sash Stop
THD266 Screw Out Sash Stop


Summer 2011

NEW London Type - Brighton Fastener

An ornamental "London Type" Brighton Fastener is now available.

This new item is available in the following finishes: Polished Brass, Chrome Plated, Satin Chrome Plated and Antique Brass.

Code Number: THD107 Brighton "London Type" Fastener, Non-Locking

(click on the image)


THD107 Brighton "London Type" Fastener, Non-Locking
THD107 Brighton "London Type" Fastener, Non-Locking


Summer 2011

NEW Improved version of the Sash Stop THD195/196 

The New Improved Version of our popular Sash Stop now allows fitting of the inserts with a 5mm Allen Key, speeding up the process of fitting as it allows you to use a power tool.
The Insert has been manufactured open ended to provide consistant plating throughout the product, which gives better protection. 
We have also changed the plastc key to an all steel key which is stronger than the previous design.

Supplied in 2 sizes:
THD195 = 19mm barrel
THD196 = 26mm barrel

Supplied in Polished Brass, Chrome Plated, Satin Chrome Plated and a new Antique Brass version.

(click on the image)


THD195 & THD196 Sash Stop
THD195 & THD196 Sash Stop


December 2010

THD240/241 now available in Antique Brass

Due to customer demand we have now introduced an Antique Brass finish of our THD240 & THD241 2" Brass Wheel Pulley with a Radius or Square Faceplate and are now available from stock.

(click on the image)



December 2010

New Size of Victorian Sash Bar

We have now introduced a 210mm version of the Victorian Sash Bar (measured between the two feet.) This new size is an addition to our existing range which measure 140mm, 300mm, 450mm and 600mm.
Due to a number of customer requests it was decided to introduce a 210mm Sash Bar which would bridge the gap between the 140mm and 300mm versions.
This new size is available in Polished Brass, Chrome Plated, Satin Chrome Plated and Antique Brass.

Code Number: THD147 210mm Victorian Sash Bars.

(click on the image)

Victorian Sash Bars
Victorian Sash Bars


Back to Home Page


Contact Us


Traditional Hardware Direct Ltd.